유도전하 충전장치용 펠렛체인의 설계

Abstract

정전압가속기에서 일상적으로 사용하는 전하운반용 펠렛의 개선을 위해서 새로이 설계 제작하였다. 실험에서 제작한 구조는 각 펠렛의 연결부분을 단순화 시켜서 파손의 취약점을 제거하였다. 이 펠렛체인을 직경 25cm인 풀리를 이용하여 1200rpm으로 회전시키고 인덕터와 펠렛간의 간격을 6.5mm로 하여 작동시험을 한 결과 유도전압에 따른 발생전류는 0.87μA/KV로 측정되었다.

Pellet chain and charge induction components which are used for charge carrying in electrostatic accelerators have been newly designed and manufactured. The structure for connecting parts of the pellet is simplified ; therefore the possibility of the breakage can be lowered.

When the pellet chain is driven 1200rpm by the pulley with 25cm diameter and the gap between inductor and pellet is 6.5mm, the experimental value of current produced by carrying charges is 0.87μA/KV.

Pellet chain and charge induction components which are used for charge carrying in electrostatic accelerators have been newly designed and manufactured. The structure for connecting parts of the pellet is simplified ; therefore the possibility of the breakage can be lowered.

When the pellet chain is driven 1200rpm by the pulley with 25cm diameter and the gap between inductor and pellet is 6.5mm, the experimental value of current produced by carrying charges is 0.87μA/KV.