KLI

Ensemble Design of Electrode-Electrolyte Interfaces: Toward High-Performance Thin-Film All-Solid-State Li-Metal Batteries

Metadata Downloads
Abstract
In accordance with the fourth industrial revolution (4IR), thin-film all-solid-state batteries (TF-ASSBs) are being revived as the most promising energy source to power small electronic devices. However, current TF-ASSBs still suffer from the perpetual necessity of high-performance battery components. While every component, a series of a TF solid electrolyte (i.e., lithium phosphorus oxynitride (LiPON)) and electrodes (cathode and Li metal anode), has been considered vital, the lack of understanding of and ability to ameliorate the cathode (or anode)-electrolyte interface (CEI) (or AEI) has impeded the development of TF-ASSBs. In this work, we suggest an ensemble design of TF-ASSBs using LiPON (500 nm), an amorphous TF-V2O5-x cathode with oxygen vacancies (O-vacancy), a thin evaporated Li anode (evp-Li) with a thickness of 1 mu m, and an artificial ultrathin Al2O3 layer between evp-Li and LiPON. Well-defined O-vacancy sites, such as O(II)(vacancy) and O(III)(vacancy), in amorphous TF-V2O5-x not only allow isotropic Li+ diffusion at the CEI but also enhance both the ionic and electronic conductivities. For the AEI, we employed protective Al2O3, which was specially sputtered using the facing target sputtering (FTS) method to form a homogeneous layer without damage from plasma. In regard to the contact with evp-Li, interfacial stability, electrochemical impedance, and battery performance, the nanometric Al2O3 layers (1 nm) were optimized at different temperatures (40, 60, and 80 degrees C). The TF-ASSB cell containing Al2O3 (1 nm) delivers a high specific capacity of 474.01 mAh cm(-3) under 60 degrees C at 2 C for the 400th cycle, and it achieves a long lifespan as well as ultrafast rate capability levels, even at 100 C; these results were comparable to those of TF Li-ion battery cells using a liquid electrolyte. We demonstrated the reaction mechanism at the AEI utilizing time-of-flight secondary ion mass spectrometry (TOF-SIMS) and molecular dynamics (MD) simulations for a better understanding. Our design provides a signpost for future research on the rational structure of TF-LIBs.
Author(s)
Cheng-Fan Xiao김종헌조수호박윤창김민정정권범윤순길정지원김일두김현석
Issued Date
2021
Type
Article
Keyword
LiPONfacing-target sputteringlithium evaporationthin-film batteriesvanadium oxide-based cathodes
DOI
10.1021/acsnano.0c08691
URI
https://oak.ulsan.ac.kr/handle/2021.oak/8967
https://ulsan-primo.hosted.exlibrisgroup.com/primo-explore/fulldisplay?docid=TN_cdi_proquest_miscellaneous_2493455620&context=PC&vid=ULSAN&lang=ko_KR&search_scope=default_scope&adaptor=primo_central_multiple_fe&tab=default_tab&query=any,contains,Ensemble%20Design%20of%20Electrode-Electrolyte%20Interfaces:%20Toward%20High-Performance%20Thin-Film%20All-Solid-State%20Li-Metal%20Batteries&offset=0&pcAvailability=true
Publisher
ACS NANO
Location
미국
Language
영어
ISSN
1936-0851
Citation Volume
15
Citation Number
3
Citation Start Page
4561
Citation End Page
4575
Appears in Collections:
Engineering > Material Engineering
공개 및 라이선스
  • 공개 구분공개
파일 목록
  • 관련 파일이 존재하지 않습니다.

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.